Wire Stringing Station Programs
Program:
Function:
- Analyse log files generated by Tension1 &2 and produce summary files
Hardware:
Input:
- *stringlog*.CSV log file generated by Tension1 or Tension2
Output:
- *_daily.csv show daily statistics
- *_oper.csv show operator summary
- *_wire.csv show wire summary
Program:
Function:
- Measure wire tension and test HV stability during wire stringing.
- For stringing station #1
Hardware:
- CTR05 works on slower CPU speed (< 1GHz) PC only
- Measurement Computings: CTR05 (board 1)
- measure frequency from waveform generator (CTRINPUT1)
- Control sound On/Off through relay (DO0)
- Measurement Computings: PCI-DAS1001 (board 0)
- Set frequency on waveform generator (D/A 0)
- Set HV (D/A 1)
- Read signal amplitude (A/D 0)
- HV trip monitor (A/D 1)
- HV sense (A/D 8)
Output:
- _1.CSV stringing log file
- _1.CSV accepted wire log file
- Can be read and analysed using Analyse.vi to produce summary
Program:
Function:
- Same as Tension1.vi except output filename.
- For stringing station #2.
Hardware:
Output:
- _2.CSV stringing log file
- _2.CSV accepted wire log file
- Can be read and analysed using Analyse.vi to produce summary