16-Channel Tension Test Programs
Program:
Function:
- Read & Display 16 channel tension test data generated by Tension16 or Tension16cern.
- Reads one data file at a time.
Hardware:
Input:
- .CSV file generated by Tension16 or Tension16cern.
Program:
Function:
- Read & Display 16 channel tension test data generated by Tension16 or Tension16cern.
- Reads in TWO data files for comparison.
Hardware:
Input:
- .CSV file generated by Tension16 or Tension16cern.
Program:
Function:
Measure wire tension for each straw channel.
Hardware:
- CTR05 works on slower CPU speed (< 1GHz) PC only
- Measurement Computings: CTR05 (Board 1)
- measure frequency from waveform generator (CTRINPUT1)
- control sound On/Off through relay (DO0)
- control HV On/Off through relay (DO1)
- Measurement Computings: PCI-DAS1001 (Board 0)
- Set frequency on waveform generator (D/A 0)
- Read 16 channel signal amplitude (A/D 0-15)
Output:
- .CSV file containing frequency spectrum & peak info for each channel.
- Can be read & displayed with Tension16Rd or Tension16Rd2
Program:
Function:
Measure wire tension for each straw channel.
Hardware:
- National Instrument: NI-PCI-6601
- Measure frequency from waveform generator (Device 1, Counter 0)
- Control sound On/Off through relay (Digital Channel 0, Line 2)
- Control HV On/Off through relay (Digital Channel 0, Line 1)
- Measurement Computings: PCI-DAS1001 (Board 0)
- Set frequency on waveform generator (D/A 0)
- Read 16 channel signal amplitude (A/D 0-15)
Output:
- .CSV file containing frequency spectrum & peak info for each channel.
- Can be read & displayed with Tension16Rd or Tension16Rd2